Dolphin emulator

GameCube Controller

Real GameCube Controller (GameCube Adapter)

To use the actual GameCube Controllers using an Official GameCube Controller Adapter for Wii U (and its clones), see How to use the Official GameCube Controller Adapter for Wii U in Dolphin. It does not require any button configuration. That does not apply to the adapters that behave as generic controllers and need to be configured (see below).

Emulated GameCube Controller

After setting any one of the emulated GameCube ports, proceed to the «Configure» button for each. One left unconfigured will be considered dummy «plugged in» during the game emulation.

Choose any device that is connected to your PC in the Device dropdown, and set the buttons and axes to your liking.

• Left click a slot to detect input, then press a button/key or axes on your selected device to save it to that slot.
• Middle click a slot to clear it of inputs.
• Right click a slot to show more input options. See Input Syntax for documentation and examples.

If you controller supports it, Rumble will allow your controller to experience the GameCube controller’s rumble functionality. Within the rumble configuration window, click on the motor pattern you wish to use (sine, cosine, etc), and press «Select» to apply it. If you wish to add a second pattern, click another pattern and press «| OR». Hit «OK» to accept the changes and exit the window.

Control Stick Calibration limits the radius of the joystick input. This is used to map the dimensions of the input source.

Always Connected forces the emulated controller to stay connected to the emulated Gamecube.

Profile allows you to save/load input configs.

After setting up everything that you want, click «OK» and the changes will save.

NOTE: If the controller is significantly off center in Dolphin but nowhere else, check all controller axis to see if one has a «+-» on it . This is not supposed to happen and is the source of your bug.

Netplay Settings

How to set the Pad buffer

Because input on the GameCube and Wii are polled by non-frame intervals, buffer does not directly relate to frames and can even vary per game. Lower the buffer as much as possible without causing slowdown for an optimal experience, ideally in areas that insure there isn’t computer related slowdown such as a menu. In most games, add roughly 1 pad buffer per 15 ms of latency per client. Two players at 50 ms latency would be roughly 3 — 4 buffer, where as three players at 50 and 65 ms would be roughly 7 buffer.

Assigning Controller Ports

By default, only players of the first port on each computers will be used. The host will be player one, and the first joiner will be player two, and so on. But the host can change the port order and invite the secondary players of the same computer. To do so, simply hit the «Assign Controller Ports» button, then add and/or order their names to the port number respectively.

Setting a Spectator

A Spectator is a connected computer that has no controllers assigned to them. Any player can be turned into a spectator by going to the «Configure Pads» window (only host has access to it) and remove the their name from the controller ports. The spectator will not cause lag or latency but can still watch the Netplay session.

Host Input Authority

This gives the host control over when inputs are sent to the game, effectively decoupling players from each other in terms of buffering. This allows players to have latency based solely on their connection to the host, rather than everyone’s connection. Buffer works differently in this mode. The host always has no latency, and the buffer setting serves to prevent stutter, speeding up when the amount of buffered inputs exceeds the set limit. Input delay is instead based on ping to the host.

This can result in smoother gameplay on unstable connections, as well as allowing players with much higher latency than others to play without increasing everyone’s latency. However, this comes at the expense of latency fairness, which may make it not suitable for competitive play.

Golf Mode

This addition to Host Input Authority allows the player with no input latency to change mid-game. This is incredibly useful for games where only one player is playing at a time, like a golf game. Do note that all other players experience a latency penalty in this mode, so it should only be used for games where only one player is playing at a time.

Reduce Polling Rate

This option used to significantly reduce the polling rate in order to lower network usage. However, it is no longer necessary in the latest development versions due to a bug fixed in how much controller data was being sent.

Últimos artículos

http-equiv=»Content-Type» content=»text/html;charset=UTF-8″>class=»well»>

Escrito por

,

el

7 de Septiembre de 2021

/ Parte de la serie Dolphin Progress Report

/ Hilo del foro

Many gaming communities over the years have reached out to thank emulator developers for their efforts. Emulators are an important part of many classic game communities and give players access to features like netplay multiplayer, modding, and savestates, while also opening up the doors to enhancements not possible on console. Sometimes it’s simply more convenient to use an emulator that runs on your desktop, tablet, or phone rather than to dig out and hook up the original console every time you want to play one of your favorite games. However, it’s important to state that our relationship with gaming communities is mutual, and without the help of players and fans, there’s no way we could handle maintaining a library of thousands of games.

In this Progress Report, the gaming communities were the direct catalyst to many of the changes. They went on difficult debugging adventures, caught small issues that would be invisible to anyone who wasn’t extremely familiar with the game, and even came up with patches to make games friendlier to emulator enhancements. All of these contributions, even if it’s not code, are appreciated and help make Dolphin what it is today.

So, without further delay, let’s get started with the August Progress Report! Enjoy.

Escrito por

el

1 de Agosto de 2021

/ Parte de la serie Dolphin Progress Report

Emulation is often seen as this suspect gray area of gaming that is tolerated but always on the edge. There’s a lot of negativity and questions around the merit and purpose of emulation. In contrast to that narrative, the overwhelmingly positive reaction to some of the features added the last few months, including heartfelt reactions from users, make all of the challenges and struggles so much easier.

As we drift further from the heyday of the GameCube and Wii, we’ve been seeing a greater impact not only on the past generations of gamers, but the current one. It was heartwarming to see long-time users able to play Four Swords Adventures with their kids or friends across the world. The gratitude we received from users finally able to try previously hard-to-access features in their favorite games was so appreciated. We love these games and consoles the same as you, and we want to make sure that they live on.

Sometimes with all the negativity in emulation, it’s refreshing to have something that makes both the developers and the users happy. And while we’d love to revel in past accomplishments, there’s still so much more work to be done. We graciously thank everyone for their kind words over the past few months, and hope you continue to enjoy using Dolphin Emulator. With that said, it is about time that we get started with the June and July Progress Report.

Escrito por

el

21 de Julio de 2021

Your eyes are not deceiving you. As of 5.0-14690, Dolphin now has mGBA directly built into it as a new way to handle Game Boy Advance connectivity with GameCube titles. For those who don’t know, mGBA is the most renowned and accurate GBA emulator of this era and has been rapidly improving since its inception. Recently, we wrote about mGBA adding support for our TCP GBA protocol, but this is something completely new. With integration and synchronization work done by bonta, connecting your favorite GameCube titles with a Game Boy Advance for multiplayer and other bonus features is now greatly simplified. Dubbed the Integrated GBA, a stripped-down version of mGBA will boot up alongside Dolphin when set to one or more controller ports. These mGBA instances are clock-synced to GameCube emulation for impeccable connection stability. By bringing these two emulators together in one package, GBA connectivity features now work with popular features like savestates, input recordings, and netplay! All of this comes with the added bonus of improved performance and compatibility. If you don’t believe us, check it out yourself!

Introducing the Integrated GBA!

Setting Up Dolphin

Your Netplay Experience will greatly vary depending on what version you tend to use. Because Dolphin 5.0 is lacking so many Netplay features at this point, it cannot be recommended for use. It is missing important features like Wii Save Synchronization (), Automated Settings Synchronization (), Cheat Code Synchronization (), Synchronize All Wii Saves () as well as protections for recovering saves if Netplay is to crash.

Rule of thumb is that most settings should be set to default and you are expected to follow specific settings where the instruction (made by host or matchmaking websites) has told you to set before playing online.

System Requirements

Every game has different requirements, some titles may require a powerful computer while some other titles may not. Generally, these are the minimum recommended requirements for Dolphin.

• OS: 64-bit edition of Windows (7 SP1 or higher), Linux, or macOS (10.12 Sierra or higher). Windows Vista SP2 and unix-like systems other than Linux are not officially supported but might work.
• Processor: A CPU with SSE2 support. A modern CPU (3 GHz and Dual Core, not older than 2008) is highly recommended.
• Graphics: A reasonably modern graphics card (Direct3D 10.0 / OpenGL 3.0). A graphics card that supports Direct3D 11 / OpenGL 4.4 / Vulkan 1.1 is recommended.

Последние статьи

http-equiv=»Content-Type» content=»text/html;charset=UTF-8″>class=»well»>

Написано

,

в

7 сентября 2021 г.

/ Часть серии статей Dolphin Progress Report

/ Тема на форуме

Many gaming communities over the years have reached out to thank emulator developers for their efforts. Emulators are an important part of many classic game communities and give players access to features like netplay multiplayer, modding, and savestates, while also opening up the doors to enhancements not possible on console. Sometimes it’s simply more convenient to use an emulator that runs on your desktop, tablet, or phone rather than to dig out and hook up the original console every time you want to play one of your favorite games. However, it’s important to state that our relationship with gaming communities is mutual, and without the help of players and fans, there’s no way we could handle maintaining a library of thousands of games.

In this Progress Report, the gaming communities were the direct catalyst to many of the changes. They went on difficult debugging adventures, caught small issues that would be invisible to anyone who wasn’t extremely familiar with the game, and even came up with patches to make games friendlier to emulator enhancements. All of these contributions, even if it’s not code, are appreciated and help make Dolphin what it is today.

So, without further delay, let’s get started with the August Progress Report! Enjoy.

Написано

в

1 августа 2021 г.

/ Часть серии статей Dolphin Progress Report

Emulation is often seen as this suspect gray area of gaming that is tolerated but always on the edge. There’s a lot of negativity and questions around the merit and purpose of emulation. In contrast to that narrative, the overwhelmingly positive reaction to some of the features added the last few months, including heartfelt reactions from users, make all of the challenges and struggles so much easier.

As we drift further from the heyday of the GameCube and Wii, we’ve been seeing a greater impact not only on the past generations of gamers, but the current one. It was heartwarming to see long-time users able to play Four Swords Adventures with their kids or friends across the world. The gratitude we received from users finally able to try previously hard-to-access features in their favorite games was so appreciated. We love these games and consoles the same as you, and we want to make sure that they live on.

Sometimes with all the negativity in emulation, it’s refreshing to have something that makes both the developers and the users happy. And while we’d love to revel in past accomplishments, there’s still so much more work to be done. We graciously thank everyone for their kind words over the past few months, and hope you continue to enjoy using Dolphin Emulator. With that said, it is about time that we get started with the June and July Progress Report.

Написано

в

21 июля 2021 г.

Your eyes are not deceiving you. As of 5.0-14690, Dolphin now has mGBA directly built into it as a new way to handle Game Boy Advance connectivity with GameCube titles. For those who don’t know, mGBA is the most renowned and accurate GBA emulator of this era and has been rapidly improving since its inception. Recently, we wrote about mGBA adding support for our TCP GBA protocol, but this is something completely new. With integration and synchronization work done by bonta, connecting your favorite GameCube titles with a Game Boy Advance for multiplayer and other bonus features is now greatly simplified. Dubbed the Integrated GBA, a stripped-down version of mGBA will boot up alongside Dolphin when set to one or more controller ports. These mGBA instances are clock-synced to GameCube emulation for impeccable connection stability. By bringing these two emulators together in one package, GBA connectivity features now work with popular features like savestates, input recordings, and netplay! All of this comes with the added bonus of improved performance and compatibility. If you don’t believe us, check it out yourself!

Introducing the Integrated GBA!

Netplay Settings

How to set the Pad buffer

Because input on the GameCube and Wii are polled by non-frame intervals, buffer does not directly relate to frames and can even vary per game. Lower the buffer as much as possible without causing slowdown for an optimal experience, ideally in areas that insure there isn’t computer related slowdown such as a menu. In most games, add roughly 1 pad buffer per 15 ms of latency per client. Two players at 50 ms latency would be roughly 3 — 4 buffer, where as three players at 50 and 65 ms would be roughly 7 buffer.

Assigning Controller Ports

By default, only players of the first port on each computers will be used. The host will be player one, and the first joiner will be player two, and so on. But the host can change the port order and invite the secondary players of the same computer. To do so, simply hit the «Assign Controller Ports» button, then add and/or order their names to the port number respectively.

Setting a Spectator

A Spectator is a connected computer that has no controllers assigned to them. Any player can be turned into a spectator by going to the «Configure Pads» window (only host has access to it) and remove the their name from the controller ports. The spectator will not cause lag or latency but can still watch the Netplay session.

Host Input Authority

This gives the host control over when inputs are sent to the game, effectively decoupling players from each other in terms of buffering. This allows players to have latency based solely on their connection to the host, rather than everyone’s connection. Buffer works differently in this mode. The host always has no latency, and the buffer setting serves to prevent stutter, speeding up when the amount of buffered inputs exceeds the set limit. Input delay is instead based on ping to the host.

This can result in smoother gameplay on unstable connections, as well as allowing players with much higher latency than others to play without increasing everyone’s latency. However, this comes at the expense of latency fairness, which may make it not suitable for competitive play.

Golf Mode

This addition to Host Input Authority allows the player with no input latency to change mid-game. This is incredibly useful for games where only one player is playing at a time, like a golf game. Do note that all other players experience a latency penalty in this mode, so it should only be used for games where only one player is playing at a time.

Reduce Polling Rate

This option used to significantly reduce the polling rate in order to lower network usage. However, it is no longer necessary in the latest development versions due to a bug fixed in how much controller data was being sent.

Requirements

• Bandwidth requirements are very light: any DSL or Cable internet connection should do. However, the internet demands rapidly increase as more players are added. Because the latency (ping) of the internet connection determines how low input latency can get, using Ethernet instead of Wi-Fi usually improves the gameplay experience.
• Each player must have their own copy of the game, and the region and game revision of all copies must match. While most compressed game formats are compatible with standard ISOs (with NKit being a notable exception), it is heavily recommended that all players use identical dumps.

Последние статьи

http-equiv=»Content-Type» content=»text/html;charset=UTF-8″>class=»well»>

Написано

,

в

7 сентября 2021 г.

/ Часть серии статей Dolphin Progress Report

/ Тема на форуме

Many gaming communities over the years have reached out to thank emulator developers for their efforts. Emulators are an important part of many classic game communities and give players access to features like netplay multiplayer, modding, and savestates, while also opening up the doors to enhancements not possible on console. Sometimes it’s simply more convenient to use an emulator that runs on your desktop, tablet, or phone rather than to dig out and hook up the original console every time you want to play one of your favorite games. However, it’s important to state that our relationship with gaming communities is mutual, and without the help of players and fans, there’s no way we could handle maintaining a library of thousands of games.

In this Progress Report, the gaming communities were the direct catalyst to many of the changes. They went on difficult debugging adventures, caught small issues that would be invisible to anyone who wasn’t extremely familiar with the game, and even came up with patches to make games friendlier to emulator enhancements. All of these contributions, even if it’s not code, are appreciated and help make Dolphin what it is today.

So, without further delay, let’s get started with the August Progress Report! Enjoy.

Написано

в

1 августа 2021 г.

/ Часть серии статей Dolphin Progress Report

Emulation is often seen as this suspect gray area of gaming that is tolerated but always on the edge. There’s a lot of negativity and questions around the merit and purpose of emulation. In contrast to that narrative, the overwhelmingly positive reaction to some of the features added the last few months, including heartfelt reactions from users, make all of the challenges and struggles so much easier.

As we drift further from the heyday of the GameCube and Wii, we’ve been seeing a greater impact not only on the past generations of gamers, but the current one. It was heartwarming to see long-time users able to play Four Swords Adventures with their kids or friends across the world. The gratitude we received from users finally able to try previously hard-to-access features in their favorite games was so appreciated. We love these games and consoles the same as you, and we want to make sure that they live on.

Sometimes with all the negativity in emulation, it’s refreshing to have something that makes both the developers and the users happy. And while we’d love to revel in past accomplishments, there’s still so much more work to be done. We graciously thank everyone for their kind words over the past few months, and hope you continue to enjoy using Dolphin Emulator. With that said, it is about time that we get started with the June and July Progress Report.

Написано

в

21 июля 2021 г.

Your eyes are not deceiving you. As of 5.0-14690, Dolphin now has mGBA directly built into it as a new way to handle Game Boy Advance connectivity with GameCube titles. For those who don’t know, mGBA is the most renowned and accurate GBA emulator of this era and has been rapidly improving since its inception. Recently, we wrote about mGBA adding support for our TCP GBA protocol, but this is something completely new. With integration and synchronization work done by bonta, connecting your favorite GameCube titles with a Game Boy Advance for multiplayer and other bonus features is now greatly simplified. Dubbed the Integrated GBA, a stripped-down version of mGBA will boot up alongside Dolphin when set to one or more controller ports. These mGBA instances are clock-synced to GameCube emulation for impeccable connection stability. By bringing these two emulators together in one package, GBA connectivity features now work with popular features like savestates, input recordings, and netplay! All of this comes with the added bonus of improved performance and compatibility. If you don’t believe us, check it out yourself!

Introducing the Integrated GBA!

Последние статьи

http-equiv=»Content-Type» content=»text/html;charset=UTF-8″>class=»well»>

Написано

,

в

7 сентября 2021 г.

/ Часть серии статей Dolphin Progress Report

/ Тема на форуме

Many gaming communities over the years have reached out to thank emulator developers for their efforts. Emulators are an important part of many classic game communities and give players access to features like netplay multiplayer, modding, and savestates, while also opening up the doors to enhancements not possible on console. Sometimes it’s simply more convenient to use an emulator that runs on your desktop, tablet, or phone rather than to dig out and hook up the original console every time you want to play one of your favorite games. However, it’s important to state that our relationship with gaming communities is mutual, and without the help of players and fans, there’s no way we could handle maintaining a library of thousands of games.

In this Progress Report, the gaming communities were the direct catalyst to many of the changes. They went on difficult debugging adventures, caught small issues that would be invisible to anyone who wasn’t extremely familiar with the game, and even came up with patches to make games friendlier to emulator enhancements. All of these contributions, even if it’s not code, are appreciated and help make Dolphin what it is today.

So, without further delay, let’s get started with the August Progress Report! Enjoy.

Написано

в

1 августа 2021 г.

/ Часть серии статей Dolphin Progress Report

Emulation is often seen as this suspect gray area of gaming that is tolerated but always on the edge. There’s a lot of negativity and questions around the merit and purpose of emulation. In contrast to that narrative, the overwhelmingly positive reaction to some of the features added the last few months, including heartfelt reactions from users, make all of the challenges and struggles so much easier.

As we drift further from the heyday of the GameCube and Wii, we’ve been seeing a greater impact not only on the past generations of gamers, but the current one. It was heartwarming to see long-time users able to play Four Swords Adventures with their kids or friends across the world. The gratitude we received from users finally able to try previously hard-to-access features in their favorite games was so appreciated. We love these games and consoles the same as you, and we want to make sure that they live on.

Sometimes with all the negativity in emulation, it’s refreshing to have something that makes both the developers and the users happy. And while we’d love to revel in past accomplishments, there’s still so much more work to be done. We graciously thank everyone for their kind words over the past few months, and hope you continue to enjoy using Dolphin Emulator. With that said, it is about time that we get started with the June and July Progress Report.

Написано

в

21 июля 2021 г.

Your eyes are not deceiving you. As of 5.0-14690, Dolphin now has mGBA directly built into it as a new way to handle Game Boy Advance connectivity with GameCube titles. For those who don’t know, mGBA is the most renowned and accurate GBA emulator of this era and has been rapidly improving since its inception. Recently, we wrote about mGBA adding support for our TCP GBA protocol, but this is something completely new. With integration and synchronization work done by bonta, connecting your favorite GameCube titles with a Game Boy Advance for multiplayer and other bonus features is now greatly simplified. Dubbed the Integrated GBA, a stripped-down version of mGBA will boot up alongside Dolphin when set to one or more controller ports. These mGBA instances are clock-synced to GameCube emulation for impeccable connection stability. By bringing these two emulators together in one package, GBA connectivity features now work with popular features like savestates, input recordings, and netplay! All of this comes with the added bonus of improved performance and compatibility. If you don’t believe us, check it out yourself!

Introducing the Integrated GBA!

Последние статьи

http-equiv=»Content-Type» content=»text/html;charset=UTF-8″>class=»well»>

Написано

,

в

7 сентября 2021 г.

/ Часть серии статей Dolphin Progress Report

/ Тема на форуме

Many gaming communities over the years have reached out to thank emulator developers for their efforts. Emulators are an important part of many classic game communities and give players access to features like netplay multiplayer, modding, and savestates, while also opening up the doors to enhancements not possible on console. Sometimes it’s simply more convenient to use an emulator that runs on your desktop, tablet, or phone rather than to dig out and hook up the original console every time you want to play one of your favorite games. However, it’s important to state that our relationship with gaming communities is mutual, and without the help of players and fans, there’s no way we could handle maintaining a library of thousands of games.

In this Progress Report, the gaming communities were the direct catalyst to many of the changes. They went on difficult debugging adventures, caught small issues that would be invisible to anyone who wasn’t extremely familiar with the game, and even came up with patches to make games friendlier to emulator enhancements. All of these contributions, even if it’s not code, are appreciated and help make Dolphin what it is today.

So, without further delay, let’s get started with the August Progress Report! Enjoy.

Написано

в

1 августа 2021 г.

/ Часть серии статей Dolphin Progress Report

Emulation is often seen as this suspect gray area of gaming that is tolerated but always on the edge. There’s a lot of negativity and questions around the merit and purpose of emulation. In contrast to that narrative, the overwhelmingly positive reaction to some of the features added the last few months, including heartfelt reactions from users, make all of the challenges and struggles so much easier.

As we drift further from the heyday of the GameCube and Wii, we’ve been seeing a greater impact not only on the past generations of gamers, but the current one. It was heartwarming to see long-time users able to play Four Swords Adventures with their kids or friends across the world. The gratitude we received from users finally able to try previously hard-to-access features in their favorite games was so appreciated. We love these games and consoles the same as you, and we want to make sure that they live on.

Sometimes with all the negativity in emulation, it’s refreshing to have something that makes both the developers and the users happy. And while we’d love to revel in past accomplishments, there’s still so much more work to be done. We graciously thank everyone for their kind words over the past few months, and hope you continue to enjoy using Dolphin Emulator. With that said, it is about time that we get started with the June and July Progress Report.

Написано

в

21 июля 2021 г.

Your eyes are not deceiving you. As of 5.0-14690, Dolphin now has mGBA directly built into it as a new way to handle Game Boy Advance connectivity with GameCube titles. For those who don’t know, mGBA is the most renowned and accurate GBA emulator of this era and has been rapidly improving since its inception. Recently, we wrote about mGBA adding support for our TCP GBA protocol, but this is something completely new. With integration and synchronization work done by bonta, connecting your favorite GameCube titles with a Game Boy Advance for multiplayer and other bonus features is now greatly simplified. Dubbed the Integrated GBA, a stripped-down version of mGBA will boot up alongside Dolphin when set to one or more controller ports. These mGBA instances are clock-synced to GameCube emulation for impeccable connection stability. By bringing these two emulators together in one package, GBA connectivity features now work with popular features like savestates, input recordings, and netplay! All of this comes with the added bonus of improved performance and compatibility. If you don’t believe us, check it out yourself!

Introducing the Integrated GBA!